To Next PageTo Next Page
Need help?Do you have a question about the Nice wingo 4024 and is the answer not in the manual?
General| Model | Wingo 4024 |
|---|---|
| Type | Electromechanical gear motor |
| Max Leaf Length | 2 m |
| Max Leaf Weight | 400 kg |
| Operating Temperature | -20°C to +50°C |
| Protection Rating | IP44 |
| Safety Features | Obstacle detection |
Important instructions and warnings for personal safety during installation and use.
Precautions and checks before installing the automation system for gate operation.
Check integrity of components, suitability of model and environment for installation.
Check gate mechanical structure, balance, and fixing zones for automation.
Check gate size and weight against graph 1 before proceeding with installation.
Decide component positions and connection diagrams based on the system design.
Details on installing rear and front fixing brackets and the gear motor itself.
How to set the stop position of the gate leaf using the mechanical limit switch.
Steps for connecting the gear motor to the control unit, including cable clamping.
Regular maintenance steps for the automation system to ensure safety and longevity.
