English – 27
Guide contained in
SPIN10KCE
SNA30 SNA30C
Type 3-piece galvanised steel pro-
le
single galvanised steel prole single galvanised steel prole
Guide length
3.15 m 3.15 m 3.05 m
Guide height
35 mm 35 mm 35 mm
Useful stroke
2.6 m 2.6 m 2.5 m
Belt/chain length 6 m 6 m 5,778.5 m
Belt height 10 mm 10 mm /
Resistance to traction 1,220 N 1,220 N /
incorporated radio receiver
Product type 4-channel receiver for incorporated radio remote control
Frequency
433.92 MHz
Coding
12-bit FLO-type xed code
52-bit FLOR-type digital rolling code
64-bit SMILO-type digital rolling code
Transmitter compatibility (1)
Supported protocols: Flo, Flor, O-Code, Smilo
Memorisable transmitters Up to 100 if memorised in Mode 1
Input impedance 52 Ω
Sensitivity better than 0.5 µV
Transmitter range From 100 to 150 m; this range can vary if there are obstacles or electromagnetic disturbances,
and depends on the position of the receiving antenna
Outputs -
Operating temperature –20°C ... +55°C
To Next Page
Loading...
Need help?
General
