1
EN
Table of contents: page page
4
Manual manoeuvre or release 5 1 Product description 2
2 Installation 2 5 Testing 5
2.1 Preliminary checks 2
2.2 Typical system layout 2
2.3 Installing Sumo (standard procedure) 3
2.4 Installing Sumo with vertical chain 3
2.5 Installing Sumo with horizontal chain 3
2.6 Electrical connections 4
6 Maintenance 5
6.1 Disposal 5
7 Technical specifi cations 6
Instructions and warnings for users of the SUMO
gear motor
7
3 Installing the release device 4
Important information
Congratulations on choosing this Nice product. Please read this handbook
carefully.
To make these instructions easier to follow, we have, wherever possible,
put them in the order in which they will be carried out during the various
system installation phases. Please read these instructions and the attached
“Warnings for fi tters” fi le carefully before installing the product as they contain
important information concerning safety, installation, use and maintenance.
Anything not expressly specifi ed in these instructions is forbidden.
Operations not indicated in these instructions may cause damage to the
product, people and property.
Nice declines all liability for badly built sectional doors or any deformations that
may occur during use.
This product has been designed and produced for automating well-balanced
doors that can be opened by hand; it must therefore be possible to completely
open the door using a force of less than 300N (30kg) and stop it in any position;
after it has been blocked it must neither rise or lower.
Do not install the product in explosive atmospheres.
Sumo
To Next Page
Loading...
Need help?
General
