25
4. Trigger/OK button/Menu – press while in video mode to
start/end recording, press while in photo mode to take a
photo. Press and hold while in standby mode (camera is not
lming video) to open the camera’s menu (settings). Press
while in settings to conrm the selected choice. Press while in
playback mode to playback a recorded video.
5. Up button/Wi-Fi/Zoom – press while in the menu to move
between the available options. Press and hold while in stand-
by mode to turn on Wi-Fi, press again to turn Wi-Fi o. Press
while recording video to digitally zoom in.
6. Down button/Playback/Turn o Zoom – press while in the
menu to move between the available options. Press and hold
while in standby mode to arrive at the options of playing back
recorded video and displaying captured photos. Press when
zoom is turned on to return to standard recording distance.
7. Speaker – plays back sounds.
8. Operational diode – the diode will shine blue when the
camera is turned on, the diode will ash blue when a video is
being recorded.
9. LED charging diode – once connected to charge, the diode
will shine red. Once the battery is fully charged, the diode will
stop shining.
10. Touch screen camera
11. micro USB – designated for charging and connecting to a PC.
12. micro HDMI – designated for connecting to a TV or monitor.
13. Micro SD slot – designated for inserting a memory card.
14. Battery cover – remove to insert/eject the battery.
15. Tripod thread – designated for connecting a tripod or other
accessories to the camera.
16. Microphone – records sounds.
SETTING THE CAMERA’S LANGUAGE MENU
Power on the camera by pressing and holding the power button (3).
Press and hold the OK button (4) to open the camera menu, then 2x
press button (3) to open camera settings. Press button (6) to switch
To Next Page
Loading...
