Nidec Commander C300 - Size 7 to 10 Auxiliary (Capacitor Bank) Fan Replacement

Unidrive M / HS Frame 7 to 10 Power Installation Guide 53
Safety information Product information
Mechanical installation
Electrical installation Technical data UL listing information
3.11.4 Size 7 to 10 auxiliary (capacitor bank) fan replacement
Figure 3-24 Size 7 to 10 auxiliary (capacitor bank) fan replacement
Auxiliary fan removal procedure
1) Disconnect fan wiring connector shown
2) Slide fan housing in the direction shown using tongue shown in enlarged diagram of fan
3) Withdraw fan housing from the drive
After fan has been replaced, reverse the above steps to refit.
Table 3-21 Auxiliary (capacitor bank) fan part numbers
Drive model Auxiliary (capacitor bank) fan part number
Size 7 3251-0041
Size 8 3251-2249
Size 9 to 10 3251-0042
1
2
3
2