Need help?Do you have a question about the Nidec Control Techniques Unidrive M Modular and is the answer not in the manual?
General| Product Category | DC Drives |
|---|---|
| Manufacturer | Nidec Control Techniques |
| Series | Unidrive M |
| Type | Modular |
| Feedback | Encoder |
| Communication Protocols | Modbus, CANopen, Ethernet/IP, Profibus |
| Safety | Safe Torque Off (STO) |
| Mounting Type | Panel Mount |
| Protection Features | Overcurrent, Overvoltage, Undervoltage, Overtemperature, Short Circuit |
| Enclosure Rating | IP20 |
| Operating Temperature Range | 0°C to 40°C |
| Relative Humidity | Up to 95% non-condensing |
| Altitude | Up to 1000m without derating |
Manufacturer liability, guide correctness, and rights reserved statements.
Drive firmware, environmental policy, and REACH legislation details.
Critical warnings about electrical shock, system safety, and installation practices.
Drive enclosure fire safety requirements and compliance with regulations.
Specifics on electrical installation, including shock risks and stored charge.
Overview of Rectifier, Size 9A, 9E/10E, and 9D/10D drive modules.
Description of essential components like input line reactors and output sharing chokes.
Details on drive ratings (Normal/Heavy Duty) and available operating modes.
Explanation of drive nameplates and a list of supplied items.
Diagrams illustrating system setups for various Unidrive M module combinations.
Essential safety precautions and planning steps for mechanical installation.
Guidance on surface/through-panel mounting and enclosure requirements.
Ambient temperature, altitude derating, and external EMC filters.
Detailed diagrams and procedures for AC/DC power and ground connections.
Requirements for AC supply, input reactors, and motor output circuit protection.
Braking, EMC, control wiring, and position feedback connection instructions.
To Next Page