Nidec Control Techniques Unidrive M Modular - Line Reactor Mounting Dimensions

Safety information Introduction Product information System configuration
Mechanical
Installation
Electrical Installation
52 Unidrive M Modular Installation Guide
Issue Number: 2
5.10 Line reactor mounting dimensions
5.10.1 Input line reactors
Figure 5-37 Single input line reactor (INLX0X)
5.10.2 Output sharing chokes
Figure 5-38 Single output sharing choke (OTLX0X)
Figure 5-39 Dual output sharing choke (OTLX1X)
For overall dimensions and other details, refer to section 6.3 Output
sharing choke specification on page 72.
187mm (7.36in)
∅ M8
130mm
(5.12in)
10mm
(0.39in)
80mm (3.15in)
5mm
(0.2in)
222mm (8.74in)
110mm
(4.33in)
155mm
(6.1in)
30mm (1.18)in
15±1mm
(0.59 0.04in)±
∅ 8.5mm
(0.34in)
75.5 2mm
(2.97 0.08in)
±
±
335 5mm
(13.19 0.2in)
±
±
335 5mm
(13.19 0.2in)
±
±
265 5mm
(10.43
0.2in)
±
±