Nidec NE300-4T2000G/2200P-U - Page 89

NE200/300 Series Drive User Manual
80 Chapter 5 List of Parameters
Code Description Setting range Default Modify
Modbus
Address
F7.19
②
AO function
definition
③ AO1 output
selection
0: NULL
1: Running freq.
(0~max frequency)
2: Setting freq.
(0~max frequency)
3: Output
current(0 ～ 2 times
of drive rated
current)
4: Output voltage
(0 ～ Max Voltage)
5: PID setup (0 ～
10V)
6: PID feedback
(0 ～ 10V)
7: Calibrating signal
(5V)
8: Output torque
(0 ～ 2 times of motor
rated torque)
9: Output power
(0 ～ 2 times of drive
rated power)
10: Bus voltage
(0~1000V)
11: 9: AI1 (0 ～ 10V)
12: AI2 (0 ～ 10V/4 ～
20mA)
13: Pulse frequency
14: Communication
setting
15: Reserve
16: Current output
(0~2 time rated
value)
1 ○ 0813H
F7.20
② Reserve
Reserve Reserve 0814H
③
AO2 output
selection
0 ○ 0814H
F7.21
② Y1 function
definition
0
○ 0815H
③ DO output
selection
0 ○ 0815H
F7.22
②
AO output
range selection
0: 0 ～ 10V/0 ～ 20mA
1: 2 ～ 10V/4 ～ 20mA
0 ○
0816H
③
AO1 output
range selection
0816H