Nidec TTC Series - Memory; Test Mode; Capacity; Print All

To Next Page

To Previous Page

5.4 Test Mode

Change the mode of operation between the six modes. Press

“MODE/UP” or “DOWN” keys to select. Press “ZERO/EXIT” to

cancel or “MENU/ENTER” to confirm and exit. This adjustment

can also be changed at the home screen display by simply press-

ing “MODE”. First Peak Mode will display a drop ratio setting

menu. This drop ratio actives the first peak recording. Auto Peak

Mode will display a Peak Time setting menu. This resets the peak

value after programmed time has elapsed. Double Peak Mode

will display a dual drop ratio settings menu. This will enable two

separate peak values to be recorded.

5.5 Capacity (TTC-E Only)

The TTC-E with external sensor when set to Auto, the display will

automatically detect the proper range of the sensor. If any uncer-

tainty or in special circumstance, you may select the sensor range

in the list.

5.6 Preset

In the Preset menu, program high and low limit values to enable

ok/ov testing. The lower limit value cannot be greater than the

upper limit value, and neither limit value can be greater than 110%

of the rated capacity. Select proper mode to have presets active.

Press “MODE/UP” to adjust the value, touch “SAVE/PRINT” to

shift to the next position. Press “ZERO/EXIT” to cancel; touch

“MENU/ENTER” to confirm and exit.

6. MEMORY

In the Memory menu, the user can browse, delete, or print the

data.

6.1 Browse All

The data will be displayed. Touch “MODE/UP” or “DOWN” keys to

go to the next position. Touch “MENU/ENTER” to see additional

details of the data. Touch “ZERO/EXIT” to go back.

6.2 Print All

In the Print All Menu the data saved in memory can be output

to a printer through the serial port RS232 connection.

(See 10.3 RS232 in Communications section for more informa-

tion)

6.3 Print Selected

In this menu, select the data range to print. Touch “MODE/UP” to

adjust the value, touch “SAVE/PRINT” to shift to the next position.

Press “ZERO/EXIT” to cancel; touch “MENU/ENTER” to confirm.

www.GlobalTestSupply.com

Find Quality Products Online at: sales@GlobalTestSupply.com