Need help?Do you have a question about the Nidec Unidrive M200 and is the answer not in the manual?
General| Series | Unidrive M200 |
|---|---|
| Overload | 150% for 60 seconds |
| Switching Frequency | 2 kHz to 16 kHz |
| Digital Output | 1 |
| Braking Resistor | Optional |
| Enclosure | IP20 |
| Product Type | Variable Frequency Drive |
| Control Method | V/f |
| Digital Inputs | 6 |
| Analog Inputs | 2 |
| Analog Output | 1 |
| Communication Protocols | Modbus RTU |
| Protection | Overcurrent, Overvoltage, Undervoltage, Overload, Overtemperature, Short Circuit |
| Operating Temperature | -10°C to +50°C |
| Humidity | Up to 95% RH, non-condensing |
To Next Page
