Nidec Unidrive M700 - Menu 22 - EtherNet;IP Out Mappings

SI-Ethernet User Guide 119
Issue: 3
Safety
information
Introduction
Mechanical
installation
Electrical
installation
Getting started
Parameters
Key features
and Protocols
PC Tools
Applications
Security Diagnostics
Glossary of
terms
Index
6.1.9 Menu 22 – EtherNet/IP Out Mappings
This menu contains the parameters used to define the destination parameters for data that will be
transmitted from the PLC.
S.21.032 Input mapping parameter 32
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
0
(Display: 0.00.000)
Units None
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format Slot Menu Param Decimal Places 0
Coding RW, PT, BU
S.22.001 Output mapping parameter 1
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
6042
(Display: 0.06.042)
Units None
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format Slot Menu Param Decimal Places 0
Coding RW, PT, BU
S.22.002 Output mapping parameter 2
Minimum
0
(Display: 0.00.000)
Maximum
499999
(Display: 4.99.999)
Default
1021
(Display: 0.01.021)
Units None
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format Slot Menu Param Decimal Places 0
Coding RW, PT, BU