Nidec Unidrive M700 - Page 128

128 SI-Ethernet User Guide
Issue: 3
S.23.002 Output fault value 2
Minimum -2147483648 Maximum 2147483647
Default 0 Units
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format None Decimal Places 0
Coding RW, PT
S.23.003 Output fault value 3
Minimum -2147483648 Maximum 2147483647
Default 0 Units
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format None Decimal Places 0
Coding RW, PT
S.23.004 Output fault value 4
Minimum -2147483648 Maximum 2147483647
Default 0 Units
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format None Decimal Places 0
Coding RW, PT
S.23.005 Output fault value 5
Minimum -2147483648 Maximum 2147483647
Default 0 Units
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format None Decimal Places 0
Coding RW, PT
S.23.006 Output fault value 6
Minimum -2147483648 Maximum 2147483647
Default 0 Units
Type 32 Bit User Save Update Rate
Module reset, EtherNet/IP
interface reset or EtherNet/IP
interface enable
Display Format None Decimal Places 0
Coding RW, PT