Nidek Medical NT-2000 User Manual (English)

Questions and Answers:

K
Karen MurphyAug 22, 2025
How to fix Nidek Medical Equipment when the screen does not turn ON?
- C
  Christina HendersonAug 22, 2025
  If the screen of your Nidek Medical Equipment does not turn on when you power it on, there might be a few reasons: * The power cord may not be properly connected. Ensure the power cord is securely connected to the wall outlet. * The power switch might not be turned on. Try turning the power switch on again. * The fuses could be blown. Check the fuses, and if they are blown, replace them with new ones.
C
Carrie LongSep 1, 2025
What does WRN2:COM ERROR mean for Nidek Medical Equipment?
- E
  Edwin MillerSep 2, 2025
  If you see 'WRN2:COM ERROR' on your Nidek Medical Equipment, it means the external communication was not performed normally. Perform communication again. If communication can be performed normally, the message disappears.
J
Jeffrey GrantAug 31, 2025
What does WRN1:PRINT ERROR mean for Nidek Medical Equipment?
- N
  Nicholas LiAug 31, 2025
  If you see 'WRN1:PRINT ERROR' on your Nidek Medical Equipment, it means the printer paper has run out or the lever of the printer head is left raised. Replace the printer paper or check the position of the lever of the printer head. If printout can be performed normally, the message disappears.
D
Dawn PorterAug 30, 2025
What does ERR1:EEPROM ERROR mean for Nidek Medical Equipment?
- M
  Michael HudsonAug 30, 2025
  If turning the power on again displays the same message 'ERR1:EEPROM ERROR' on your Nidek Medical Equipment, turn OFF the power and contact NIDEK or your authorized distributor. The cause may be turning OFF of the power during writing of the data in the EEPROM or failure of the main board or the EEPROM on the main board.
J
jennifer36Aug 28, 2025
What to do if Nidek Medical Equipment printer is working, but nothing is printed on the paper?
- Y
  younglauraAug 28, 2025
  If your Nidek Medical Equipment printer is working, but nothing is printed on the paper, it could be because: * The printer paper is set upside down. Reverse the printer paper. * The printer head is damaged. If reversing the paper doesn't solve the issue, contact NIDEK.
K
Karen TaylorAug 27, 2025
Why the main unit of Nidek Medical Equipment cannot be moved horizontally?
- O
  Oscar MendezAug 27, 2025
  If the main unit of your Nidek Medical Equipment cannot be moved horizontally, it is possible that the locking knob is set to LOCK or BRAKE. Cancel the LOCK or BRAKE of the locking knob.
G
gonzalesericaAug 27, 2025
What to do if Nidek Medical Equipment screen suddenly turns OFF?
- C
  Chad DrakeAug 27, 2025
  If the screen on your Nidek Medical Equipment suddenly turns off, here's what might be happening: * The monitor auto-OFF function is activated. If the memory lamp is blinking, press any switch. * The fuses are blown. Check the fuses and replace them if necessary.
W
William StoneAug 25, 2025
Why Nidek Medical Equipment screen does not turn ON though the instrument is powered ON?
- P
  Patrick RiveraAug 26, 2025
  If the screen on your Nidek Medical Equipment doesn't turn on even though the instrument is powered on, it could be due to the following: * The monitor auto-OFF function may be activated. If the memory lamp is blinking, try pressing any switch. * The brightness adjustment may not be correct. Adjust the brightness using the control panel under the cover for the sub-switches.
C
Christopher ConradAug 23, 2025
What to do if Nidek Medical Equipment printing out cannot be performed?
- T
  Tanya KimAug 23, 2025
  If your Nidek Medical Equipment isn't printing, it could be due to a few reasons: * The printer paper may have run out. Check and replace the paper if necessary. * The printer paper may be jammed. Remove any jammed paper. * The measurement data might be deleted. Check the memory lamp to see if the measurement data is stored in the instrument.