NIKKARI SSET - 2 Outline; Name of Parts and Their Functions

13
2. Outline
2.1 Name of Parts and Their Functions
The edger is a device with the attachment installed to the powerhead (separately sold).
The following is the structure of the attachment and name and function of each part.
Note
● There are two types of powerheads. For details about the powerhead, refer to the powerhead manual.
1
72
3
6
4
5
No. Name Description
1 Blade Rotates at high speed for edging grasses.
2 Gear case Changes rotational angle from the powerhead to the cutting head.
3 Blade guard Guards from objects such as grasses, stones and sand scattered by the
blade.
4 Shaft tube Itisthemainframe.Thepowertransmissionshaft(exibleshaft)is
inside this tube.
5 Wheel It rolls on the ground while working for support. It is also used to adjust
the height.
6 Height adjustment knob It is the knob to adjust the height of the wheel.
7 Protection rubber Protects from grasses, weeds, stones, sand, etc. scattered by the blade.