NIKKARI SSET - 3 Installation; Installation Method

16
3. Installation
3.1 Installation Method
Before installing or removing any attachment or part, stop the engine and, if
attached, let the edger blade come to a complete stop.
* Iftheenginestartsduringthework,handsorngerscouldbeseveredbythemoving
parts or blade.
3.1.1 Combination with Powerhead
Do not install any unapproved powerhead to the attachment.
* The attachment could separate from the powerehead, causing sever injury.
The attachment can be installed only to our approved equipment (shown below).
Manufacturer Approved Powerheads
Honda Motor Co., Ltd. UMC425A
Honda Motor Co., Ltd. UMC435A