NIKKARI SSET - Specification; Attached Material; Position of Model and Serial no

14
2.2 Specication
■StandardSpecication
Item Specication
Weight 4.1 lb (1.9 kg)
Length 27.5 in (700 mm)
Blade length 7.87 in (200 mm)
2.3 Attached Material
The following are attached materials. For the powerhead, refer to the powerhead manual.
Instruction manual
(this book)
2.4 Position of Model and Serial No.
Check the model code of your attachment on the
nameplate attached to the machine shaft.
Record serial No. (See “9. Servicing”). You will need
this model code and serial No. when ordering parts,
and when making technical or warranty inquiries.
Note
● The model code is 4 letters.
The model code is different from the model name.
xxxxxxxᲵSerial No.