Nikon 1 S1 User Manual

70
t
Use the built-in flash for additional lighting when the subject is
poorly lit or to “fill-in” (illuminate) back-lit subjects. The camera
offers a choice of flash modes; choose a mode according to light-
ing conditions and your creative intent. The built-in flash is avail-
able in the following shooting modes:
❚❚ Auto Pop-up Modes
In C (auto) and in night portrait, backlighting, soft, miniature
effect, and selective color w (creative) modes, the flash will
pop-up automatically and fire when required.
1
Choose a flash mode (0 71).
2
Take pictures.
❚❚ Manual Pop-up Modes
When P, S, A, or M is selected in w (creative) mode, the flash
must be raised manually. The flash will not fire if it is not raised.
1
Raise the flash.
The Built-in Flash
The flash will pop up and
fire as required. In night
portrait (0 38) and (if HDR
is off) in backlighting
(0 44) mode, the flash will
pop up and fire with every
shot.
Press the flash pop-up button to raise
the flash.
2
Choose a flash mode (0 71).
3
Take pictures.
The flash will fire with every shot. To
disable the flash, press it gently down-
ward until it latches (0 73).
Flash pop-up button

Nikon 1 S1 Specifications

General

Camera type	Mirrorless
Sensor	CMOS
Effective Pixels	10.1 million
Lens Mount	Nikon 1 mount
Autofocus	Hybrid AF (Phase-detection/Contrast-detect AF)
LCD Screen Size	3.0 inches
LCD Screen Resolution	460, 000 dots
Storage Media	SD/SDHC/SDXC
Battery Life	Approx. 220 shots
Dimensions	102 x 60.5 x 29.7 mm
Sensor Size	13.2 mm x 8.8 mm
ISO Sensitivity	ISO 100-6400
Shutter Speed	1/16000 - 30 sec
Video Recording	Full HD 1080p
Battery	EN-EL20
Weight	240 g (including battery and memory card)