Nikon 1 V1 Reference Manual

56
t
3
Focus.
Rotate the multi selector until the sub-
ject is in focus. Rotate the multi selec-
tor clockwise to increase the focus
distance, counterclockwise to
decrease; the faster you rotate the
multi selector, the quicker the focus
distance changes. The focus indicator
shows the approximate focus dis-
tance. Press J when the subject is in
focus.
To magnify the view in the display by
up to about 10× for precise focus,
press the W control up. Press 1, 2, 3,
or 4 to view areas of the frame not
currently visible in the display; the vis-
ible portion is shown by the naviga-
tion window. To zoom out, press the W
control down.
Multi selector dial: Focus
W control: Zoom in or out
Focus indicator
Navigation window
A
Movies
The multi selector can also be used to choose the focus distance if man-
ual focus is selected during movie recording. Rotate the multi selector
clockwise to increase the focus distance, counterclockwise to decrease;
the faster you rotate the multi selector, the quicker the focus distance
changes.
A
Focal Plane Position
To determine the distance between your
subject and the camera, measure from the
focal plane mark on the camera body. The
distance between the lens mounting flange
and the focal plane is approximately 17 mm
(0.7 in.).
Focal plane mark
Approx.
17 mm

Nikon 1 V1 Specifications

General

Sensor Type	CMOS
Sensor Size	13.2 x 8.8 mm
Effective Pixels	10.1 million
Screen Resolution	921, 000 dots
Dimensions	113 x 76 x 43.5 mm
Camera Type	Mirrorless
Lens Mount	Nikon 1 mount
Focal Length Multiplier	2.7x
Shutter Speed	30 - 1/16000 sec
Storage Media	SD/SDHC/SDXC
ISO Sensitivity	ISO 100-3200, expandable to 6400
Autofocus System	Hybrid AF with contrast and phase detection
Continuous Shooting Speed	Up to 60 fps
Viewfinder	Electronic (1.44M-dot)
Screen Size	3.0 inches
Video Recording	Full HD 1080p at 30fps
Battery Life	Approx. 350 shots (CIPA)
Weight	294 g (body only)