Upgrading the COOLPIX 5400
Firmware
— Windows —
Thank you for choosing a Nikon product. This guide describes
how to upgrade the camera firmware for the COOLPIX 5400.
If you are not confident that you can perform the update
successfully, the update can be performed by a Nikon service
representative.
Get ready
To upgrade the firmware for the COOLPIX 5400, you will need:
• A COOLPIX 5400 digital camera
• A UC-E1 USB cable or a CompactFlash card reader
• One of the following power sources:
— An EH-53 AC adapter or an EH-21 AC adapter/battery charger
— A fully-charged EN-EL1 rechargeable battery
— A fresh 2CR5 (DL245) battery
• A Nikon-approved CompactFlash memory card that has been formatted in the
COOLPIX 5400
•
The
Nikon Guide to
Digital Photography
for the COOLPIX 5400
Check the current firmware version for the
COOLPIX 5400
1
Open the camera monitor.
To Next Page
