To Next Page
C
Charles PayneAug 31, 2025
How to improve monitor readability on Nikon Digital Camera?
- AAustin SanchezAug 31, 2025
If your Nikon Digital Camera monitor is hard to read, try adjusting the monitor brightness or cleaning the monitor if it's dirty.
How to improve monitor readability on Nikon Digital Camera?
If your Nikon Digital Camera monitor is hard to read, try adjusting the monitor brightness or cleaning the monitor if it's dirty.
Why are there bright spots in my Nikon Digital Camera flash photos?
If bright specks appear in images captured with flash on your Nikon Digital Camera, the flash is likely reflecting off particles in the air. Set the flash mode to W (off).
Why are my photos too dark on my Nikon COOLPIX AW120 Digital Camera?
If your Nikon Digital Camera images are too dark (underexposed), check if the flash mode is set to W (off) or if the flash window is blocked. The subject might also be beyond the flash range. You can also adjust exposure compensation, increase ISO sensitivity, or, if the subject is backlit, set the scene mode to Backlighting with HDR set to k, or set the flash mode to X (fill flash).
Why doesn't the flash work on my Nikon Digital Camera?
If your Nikon Digital Camera flash does not fire, check if the flash mode is set to W (off), or if a shooting mode that restricts the flash is selected. Also, verify if 'On' is selected for 'Blink proof' or 'Smile timer' in the smart portrait menu, or if any other function that restricts the flash is enabled.
How to correct date and time on Nikon COOLPIX AW120 Digital Camera?
If the date and time of recording are not correct on your Nikon Digital Camera, set the correct time and date in the Time zone and date option in the setup menu. Note that the camera clock may not be as accurate as ordinary watches or clocks, so periodically compare and reset as needed. If the camera clock has not been set, the “Date not set” indicator flashes during shooting and movie recording. Images and movies saved before the clock is set are dated “00/00/0000 00:00” or “01/01/2014 00:00” respectively.
How to fix blurred images on Nikon COOLPIX AW120 Digital Camera?
If your Nikon Digital Camera images are blurred, consider the following solutions: * Use the flash. * Increase the ISO sensitivity value. * Enable vibration reduction or motion detection. * Use j (Best Shot Selector). * Use a tripod to stabilize the camera, using the self-timer at the same time is more effective.
Why is the screen blank on my Nikon COOLPIX AW120 Digital Camera?
If your Nikon Digital Camera monitor is blank, it could be due to several reasons: * The camera might be off. * The camera may have entered standby mode; press the power switch, shutter-release button, A button, c button, or b (e movie-record) button. * The flash lamp is charging; wait for it to complete. * The camera is connected to a computer via USB or to a TV via HDMI cable. * The camera is connected to a smart device using Wi-Fi and is being controlled remotely.
Why does my Nikon COOLPIX AW120 keep turning off?
If your Nikon Digital Camera turns off unexpectedly, it could be due to several reasons: * The camera's auto-off function is activated to save power. * The camera or battery might be too cold. * The inside of the camera may have become too hot; let it cool before trying again. * The USB cable connecting the camera to a computer or printer may have been disconnected; reconnect the USB cable.
Why won't my Nikon Digital Camera battery charge?
If the battery inserted in your Nikon Digital Camera cannot be charged, ensure all connections are secure. When connected to a computer, charging may be affected if 'Off' is selected for 'Charge by computer' in the setup menu, if the camera is turned off, or if the camera’s display language and date/time haven't been set or were reset. Charging may also stop if the computer is in sleep mode or depending on the computer's specifications. Use the charging AC adapter to charge the battery.
Why my Nikon Digital Camera cannot be turned on?
If your Nikon Digital Camera cannot be turned on, it is likely that the battery is exhausted. The power switch becomes enabled a few seconds after inserting the battery, so wait a few moments before pressing the power switch.
General| Sensor | CMOS |
|---|---|
| Effective Pixels | 16.0 million |
| Image Sensor Size | 1/2.3 in. |
| Optical Zoom | 5x |
| Maximum Aperture | f/2.8-4.9 |
| Dustproof | Yes |
| GPS | Yes |
| Wi-Fi | Yes |
| Digital Zoom | Up to 4x |
| Lens Construction | 12 elements in 10 groups |
| Vibration Reduction | Lens shift |
| ISO Sensitivity | 125-1600 |
| Monitor Features | Anti-reflection coating |
| Storage Media | SD, SDHC, SDXC memory cards |
| Waterproof | Up to 18m (59 ft) |
| Shockproof | Yes (up to 2.0m/6.6ft) |
| Freezeproof | -10°C (14°F) |
| Battery | Rechargeable Li-ion Battery EN-EL12 |
| Battery Life | Approx. 350 shots |
| Dimensions | 110.1 x 66.0 x 25.5 mm |
| Weight | Approx. 213 g |
| Lens Focal Length | 5.0-25.0 mm (angle of view equivalent to that of 24-120 mm lens in 35mm [135] format) |
