85
Technical Notes
Camera cannot focus using auto-
focus
• Subject is low in contrast, dominated
by repeating geometric patterns, cov-
ers too small an area of the frame, or
contains many fine details, objects of
sharply differing brightness, or objects
at different distances from the cam-
era. Use focus lock to focus on
another subject at same distance.
• Focus error. Turn camera off and then
on again.
15
13
Pictures are blurred • Use flash.
• Use BSS.
• Use tripod and self-timer.
18
69
20
Pictures are too dark
(underexposed)
• Flash is off.
• Flash window is blocked.
• Subject is outside range of flash.
• Exposure compensation is too low.
• Subject is backlit: select (scene
mode) or use fill flash.
18
14
18
68
18, 30
Randomly-spaced bright pixels
(“noise”) appear in image
Shutter speed too slow. Noise can be
reduced by:
• Using flash
• Choosing , , , , , , ,
, or in scene mode
18
23
Pictures are smeared Lens is dirty. Clean lens. 79
Colors are unnatural White balance does not match light
source.
66
Flash does not fire Flash is off. Note that flash turns off
automatically in (movie) mode and
some scene modes or when option
other than Single is selected for Con-
tinuous or BSS is on.
18,
68, 69
Bright specks in pictures taken
with flash
Flash is reflecting from particles in air.
Turn flash off.
18
Problem Cause/Solution
To Next Page
Loading...
