E50
Reference Section
Blink Proof
The camera automatically releases the shutter twice each time an image is taken. Of the two
shots, one in which the subject’s eyes are open is saved.
The current setting can be confirmed in the monitor when shooting (A9). No Indicator is
displayed when Off is selected.
B Note About Blink Proof
This function cannot be used with some functions (A65).
Select the smart portrait mode M d button M Blink proof M k button
Option Description
y On
Enables blink warning.
Flash cannot be used when On
is selected.
If the camera saved an image in
which the subject’s eyes may
have been closed, the dialog
shown on the right is displayed
for a few seconds.
Off (default setting) Turns the blink warning off.
A blink was detected in the
picture just taken.
To Next Page
Loading...
