50
Adjusting the A (Auto) Mode setting
More on Shooting
r Touch AF/AE (Tapping the Monitor to Focus)
The touch shooting setting can be changed from Touch shutter (default setting)
to Touch AF/AE.
Tap a subject in the monitor to select the area at which the camera focuses. Press
the shutter-release button halfway to lock focus and exposure for the area tapped,
and press the shutter-release button the rest of the way down to take the picture.
1 Tap the bottom tab, tap q/s/r (touch
shooting) (A 42), then tap r (touch AF/AE).
2 Tap the subject at which the camera focuses.
u or a double border will be displayed at the area
tapped.
When digital zoom is applied, the focus area cannot be
selected.
To cancel the focus area selection, tap a displayed at left
in the monitor.
If a position at which focus cannot be acquired is tapped,
X will be displayed in the monitor. Tap another
position inside X.
A (auto) M Tap the bottom tab M q/s/r Touch shooting
Touch shooting
Touch AF/AE
AUTO
AUTO
OFF
3
3
3
3
To Next Page
Loading...
