63
Features That Can Be Set Using the Multi Selector
Shooting Features
Available Flash Modes
C The Flash Mode Setting
• The setting varies with the shooting mode. See “Available Features” (A61) and “Default Settings”
(A67) for more information.
• Some settings cannot be used with other functions (A71).
• The flash mode setting applied in A (auto) mode is saved in the camera’s memory even after the
camera is turned off.
C Red-eye Reduction
This camera uses Advanced Red-Eye Reduction (In-Camera Red-Eye Fix).
If the camera detects red eye while saving an image, the affected area will be processed to reduce
red-eye before the image is saved.
Note the following when shooting:
• More time than usual is required to save images.
• Red-eye reduction may not produce the desired results in all situations.
• In some cases, red-eye correction may be applied to areas of an image unnecessarily. In these
cases, select another flash mode and take the picture again.
U
Auto
The flash fires automatically when lighting is dim.
V
Auto with red-eye reduction
Reduce red-eye in portraits caused by the flash.
W
Off
The flash will not fire.
We recommend using a tripod to stabilize the camera when shooting in dark
surroundings.
X
Fill flash
The flash fires whenever a picture is taken. Use to “fill-in” (illuminate) shadows and
backlit subjects.
Y
Slow sync
Auto flash mode is combined with slow shutter speed.
Suited to evening and night portraits that include background scenery.
The flash illuminates main subject; slow shutter speeds are used to capture
background at night or under dim lighting.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
