122
Basic Camera Setup: The Setup Menu
Shooting, Playback, and Setup Menus
I Record Orientation
Choose whether or not to record the orientation of
pictures taken in “tall” orientation.
Choose [Auto] to record the picture’s orientation
detected by the camera’s sensor. The taken picture
will be automatically rotated when played back on
the camera monitor or with PictureProject. When
[Off] is selected, the picture will be displayed in the same orientation as it
was taken.
i Auto Off
Choose the time allowed to elapse before the cam-
era enters standby mode to save power (c 23).
The time options are 30 seconds, one minute, five
minutes, and 30 minutes. The power-on lamp
flashes in standby mode. If no operations are per-
formed for another three minutes, the camera turns
off.
j Notes on Auto Off
The monitor will remain on for a minimum of:
• Three minutes when menus are displayed
• Thirty minutes during continuous playback for slide shows and Pictmotion movies, or when
the AC adapter is connected
Exit
Auto
Off
Record orientation
Auto off
Exit
30s
1m
5m
30m
To Next Page
Loading...
Need help?
General
