92
Subject is too bright
s
(flashes)
• Use a lower ISO sensitivity.
• Use commercial ND filter.
• In mode:
S Increase shutter speed
A Choose a smaller aperture (higher
f-number)
% Choose another shooting mode
Subject is too dark
• Use a higher ISO sensitivity.
• Use flash.
• In mode:
S Lower shutter speed
A Choose a larger aperture (lower
f-number)
No “Bulb” in S mode
A/s
(flashes)
Change shutter speed or select mode M.
No “Time” in S mode
& /s
(flashes)
—
N
(flashes)
Flash has fired at full power.
Check
photo in monitor; if underexposed,
adjust settings and try again.
—
N/s
(flashes)
• Use the flash.
• Change distance to subject, aperture,
flash range, or ISO sensitivity.
• Lens focal length is less than 18 mm:
use a longer focal length.
Indicator
SolutionMonitor Viewfinder
To Next Page
Loading...
