77
Copying Pictures to the Computer
Before proceeding, be sure you have installed ViewNX-i (0 76).
1 Connect the USB cable.
After turning the camera off and ensuring that a memory
card is inserted, connect a USB cable (available separately) as
shown and then turn the camera on.
Using ViewNX-i
D USB Hubs
Connect the camera directly to the computer; do not connect the
cable via a USB hub or keyboard.
A Use a Reliable Power Source
To ensure that data transfer is not interrupted, be sure the camera
battery is fully charged.
A Connecting Cables
Be sure the camera is off when connecting or disconnecting
interface cables.
Do not use force or attempt to insert the
connectors at an angle.
To Next Page
Loading...
