146
r
White balance can be selected by pressing the U button and
rotating the main command dial until the desired setting is
displayed in the control panel.
K Choose color temp.
2,500–
10,000 K
Choose color temperature from list of
values (0 152).
L Preset manual —
Use subject, light source, or existing
photograph as reference for white
balance (0 154).
* All values are approximate and do not reflect fine-tuning (if applicable).
U button Main command dial Control panel
A The Shooting Menu
White balance can also be adjusted using the
White balance option in the shooting menu
(0 268), which also can be used to fine-tune
white balance (0 148) or measure a value for
preset white balance (0 154).
The Auto option
in the White balance menu offers a choice of
Normal and Keep warm lighting colors, which
preserves the warm colors produced by incandescent lighting, while
the I Fluorescent option can be used to select the light source from
the bulb types.
A Studio Flash Lighting
Auto white balance may not produce the desired results with large
studio flash units.
Use preset white balance or set white balance to
Flash and use fine-tuning to adjust white balance.
Option Color temp.
*
Description
To Next Page
Loading...
