48
x
Focusing in Live View
To focus using autofocus, rotate the focus-
mode selector to AF and follow the steps
below to choose autofocus and AF-area
modes. For information on focusing manually,
see page 55.
❚❚ Choosing a Focus Mode
The following autofocus modes are available in live view:
To choose an autofocus mode, press the AF-mode button and
rotate the main command dial until the desired mode is displayed
in the monitor.
Mode Description
AF-S
Single-servo AF: For stationary subjects.
Focus locks when shutter-
release button is pressed halfway.
AF-F
Full-time servo AF: For moving subjects.
Camera focuses
continuously until shutter-release button is pressed.
Focus locks
when shutter-release button is pressed halfway.
AF-mode
button
Main command
dial
Monitor
Focus-mode
selector
To Next Page
Loading...
