Nikon D800E - Page 185

161
r
Protecting a White Balance Preset
Follow the steps below to protect the selected white balance
preset.
Protected presets can not be modified and the Fine-tune
and Edit comment options can not be used.
1 Select L (Preset manual).
Highlight Preset manual in the
white balance menu (0 158)
and press 2.
2 Select a preset.
Highlight the desired preset
and press the center of the
multi selector.
3 Select Protect.
Highlight Protect and press 2.
4 Select On.
Highlight On and press
J to protect the
selected white balance
preset.
To remove
protection, select Off.
J button