182
l
3 Choose a flash mode.
Press the M (Y) button and
rotate the main command
dial until the desired flash
mode icon is displayed in the
control panel (0 183).
4 Check exposure (shutter speed and aperture).
Press the shutter-release button halfway and check shutter
speed and aperture. The settings available when the built-in
flash is raised are listed in “Shutter Speeds and Apertures
Available with the Built-in Flash” (0 184).
The effects of the flash can be previewed by pressing the
depth-of-field preview button to emit a modeling flash
(0 307).
5 Take the picture.
Compose the photograph, focus, and shoot.
A Lowering the Built-in Flash
To save power when the flash is not in use, press
it gently downward until the latch clicks into
place.
M (Y) button
Control panel
Main command
dial
To Next Page
Loading...
