205
t
❚❚ Pausing Interval Timer Photography
Interval timer photography can be paused by:
• Pressing the J button between intervals
• Highlighting Start > Pause in the interval timer menu and
pressing J
• Turning the camera off and then on again (if desired, the
memory card can be replaced while the camera is off)
• Selecting self-timer (E) or M
UP release mode
To resume shooting:
1 Choose a new starting
time.
Choose a new starting time as
described on page 201.
2 Resume shooting.
Highlight Restart and
press J.
Note that if
interval timer photography
was paused during
shooting, any shots
remaining in the current
interval will be canceled.
J button
To Next Page
Loading...
