38
s
3 Check the number of exposures remaining.
The control panel and viewfinder
show the number of photographs
that can be taken at current settings
(values over 1,000 are rounded down
to the nearest hundred; e.g., values
between 1,400 and 1,499 are shown
as 1.4 K).
If two memory cards are
inserted, the displays show the space
available on the card in the primary
slot (0 89).
When the number of
exposures remaining reaches A, the
number will flash, n or j will
blink in the shutter-speed displays,
and the icon for the affected card will
blink.
Insert another memory card or
delete some photos (0 234).
To Next Page
Loading...
