Total Station DTM-302 Series Instruction Manual xi
Contents
Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . iii
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . .iv
LED Safety. . . . . . . . . . . . . . . . . . . . . . . . . . . . . v
Warnings and Cautions. . . . . . . . . . . . . . . . . . . . . . .vi
1 Introduction . . . . . . . . . . . . . . . . . . . . 1
Welcome . . . . . . . . . . . . . . . . . . . . . . . . . 2
Instrument accuracy and display. . . . . . . . . . . 2
Parts of the Instrument . . . . . . . . . . . . . . . . . . . 4
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . 6
2 Preparation. . . . . . . . . . . . . . . . . . . . . 9
Unpacking and Packing the Instrument . . . . . . . . . . . . 10
Unpacking . . . . . . . . . . . . . . . . . . 10
Packing . . . . . . . . . . . . . . . . . . . 10
Charging and Discharging the Battery Pack . . . . . . . . . . 10
Detaching and Re-Attaching the Battery Pack. . . . . . . . . 13
Setting Up the Tripod . . . . . . . . . . . . . . . . . . . . 14
Centering . . . . . . . . . . . . . . . . . . . . . . . . . 15
Centering using the optical plummet . . . . . . . . 15
Centering using a plumb bob . . . . . . . . . . . 16
Leveling. . . . . . . . . . . . . . . . . . . . . . . . . . 16
Sighting . . . . . . . . . . . . . . . . . . . . . . . . . . 17
Setting Up the Prism Reflector. . . . . . . . . . . . . . . . 18
Adjusting the height of the tribrach adapter . . . . . 19
Changing the direction of the prism . . . . . . . . 19
Setting the prism constant . . . . . . . . . . . . 19
Setting the position of the target plate . . . . . . . 20