10 Error Messages
198 Total Station DTM-302 Series Instruction Manual
DELETE Stn-XYZ 104.4
You have tried to delete a coordinate record that the current ST or BS refers to. You
must confirm that you want to delete a coordinate record that the current ST or BS
refers to.
Job Manager 10.5
Cannot Assign 105.1
You have tried to set the current job as the control file.
Press any key to return to the previous screen. Then select a different job.
Can't Create 105.2
There is no space available to create a job or record a point.
Press any key to return to the Job Manager. Then use the
DEL softkey to delete old
jobs.
Existing Job 105.3
You have entered an existing job name for a new job.
Press any key and then change the name for the new job.
MAX 32Jobs 105.4
You are trying to create a new job when the maximum number of jobs (32) is
already stored.
Press any key to return to the Job Manager. Then use the
DEL softkey to delete old
jobs.
To ... Press ...
delete XYZ the
DEL softkey
return to the previous screen without deleting XYZ [ESC] or the
Abrt softkey
To Next Page
Loading...
Need help?
General
