Secure the cassette with the
3. film rewind fork
@D
by press-
ing the knob back.
Insert the film leader into any
of
the film takeup
spool's.
six
4.
slots.
Be
sure the film's perforations engage the film sprock-
ets
e.
Press the shutter release button and stroke the film wtnd-
ing lever to advance the film.
7
Advance the film, press the shutter release button,
•
and
advance the film again until the frame coun-
ter 0 indicates 1 to start
AUTO
operation.
Note:
Do
not
attempt
to
take
pictures prior
to
frame 1, since
the
meter
does
not
function before
thi
s.
QA
Q_
How can I be sure the film
has been properly loaded and is
being advanced?
A _ If, as you advance the film
winding lever, the film rewind knob rotates in the oppo·
site direction of the arrow engraved on it, you can
be
sure the film is being properly advanced.
Note: If you release the shutter during "
AUTO
" oper-
ation with the cap mounted on the lens or in
an
extra-
dark place, the reflex mirror
G)
will remain in the "
up
"
position.
To
return the mirror to its original position, set
the shutter operation mode selector
8to
M90 or -
e.
15
To Next Page
Loading...
