Nikon EM - Page 6

5
Load film (14-15). To ensure proper film winding, make sure
• that both edges of the film engage the film sprockets • .
d- ~~
,ft -- .\
'- .. ~. '
--
,. A
Rotate film rewind crank
6. take up film slack (14-15). Be
careful that you do not wind film
back into the cassette.
21 •
Press shutter release button • all the way (21).
9. Note: Do not attempt to take pictures prior to frame 1. the
start of
AUTO operation. since the meter does not function
before this.
1
0
Stroke film winding lever., to advance
.film (21).
6