Nikon F6 - Page 135

135
Menu Guide
• Setting imprint data for frame number 0
1
Turn the power switch on, press the MENU button to display menu, then
display the Data imprint menu in SHOOTING MENU.
• To display the Data imprint menu, see steps 1 and 2 in on page 128.
2
Select Data in frame 0 imprint from the Data imprint menu.
• Press P/{ on the multi-selector to select “Data in Frame 0” and press > to set.
3
Select data to be imprinted.
• Press P/{ to select “Between frames”, “Date in frame” or “Film No. In
frame” and > to set. The display returns to the data imprint menu.
4
Complete the operation.
• Press < to backtrack display by display or press MENU button twice to return
to the shooting data display.
Notes on imprinting data on frame number 0
• Data is imprinted when the film is loaded. Even if no pictures are taken before film
is unloaded, data is imprinted on the film.
• If the film is pulled out too far when loading film, frame number 0 is exposed and
imprinted data may be unreadable.
P930_En 04.10.19 7:19 PM Page 135