72
Auto Exposure Lock
To control the exposure of a specific area within a scene, measure
the exposure for the area with Spot or Center-Weighted Metering,
then press the AE/AF-L button to lock the exposure, and recompose
the picture. Set exposure to a mode other than Manual.
2
Position focus area (in Spot metering) or
center of the frame (in Center-Weighted
metering) on subject and lightly press the
shutter release button, then press the
AE/AF-L button. Confirm focus indicator /
appears in the viewfinder.
• When the AE/AF-L button is pressed, AE-L
appears in the viewfinder.
1
While pressing the metering system selector
lock release, rotate the metering system
selector to select Center-Weighted or Spot
Metering.
• Matrix Metering is not recommended since the
exposure cannot be properly locked.
3
While pressing the AE/AF-L button,
recompose, focus and shoot.
• While the exposure is locked, the metering
system only changes when the AE/AF-L button
is released (not when the metering system
selector is adjusted).
P930_En 04.10.19 7:19 PM Page 72
To Next Page
Loading...
