Nikon F6 - Page 145

145
Menu Guide
• Specifying lens data
1
Turn the power switch on and press the MENU button so the Menu
display appears on the rear LCD.
2
Select the Non-CPU lens data display.
• Press P/{ on the multi-selector to select “Non-CPU lens data” and press >
so the Non-CPU lens data display appears.
• Up to 10 lens data can be set. Press P/{ to select number (0-9) and press
INFO button so the Edit lens data display appears. (Press > without pressing
INFO button to set lens number and return to the Menu display.)
3
Specify non-CPU lens data.
• Press P/{ to set focal length.
Press > to highlight “Max.
aperture”.
• Press P/{ to set maximum
aperture. Press > to enter the lens
data to selected lens number and
return to the Menu display.
4
Complete the operation.
• Press < to backtrack display by display or press MENU
button twice to return to the shooting data display.
• With lens number 1, the selected lens number is displayed
as “L-1” in the rear LCD panel. No number is displayed
when a CPU lens is attached and when either focal length
or maximum aperture is not specified with non-CPU lens.
P930_En 04.10.19 7:19 PM Page 145