Film speed ring (lift and turn)/ Exposure compensation dial (push lock release
button and turn)
Exposure compensation settings
(+2
to
-2)
ISO film speed scale (DX setting for
DX
-coded film ;
12
to 3200 for non-OX-coded film)
Exposure compensation
dial
lock
release button
Film rewind crank
(fold out to rewind film)
Film cartridge window
Film pl'ane indicator (exact distance from
lens mounting tlange and fi lm plane
is
46,5mm)
Film advance mode selector (lift and turn)/Fingerguard
L to lock shutter release, turn power off
S for single-frame shooting
C for continuous shooting
Shutter release button (to activate
exposure meter, lightly press to
fingerguard position; to
re
lease shutter,
depress fully)
Camera strap eyelet
Film rewind
button
(press while sliding
lever)
Film rewind lever
(slide to right)
Film advance indicator (rotates to show
film
is
loaded and being advanced)
Red indicator lamp [blinks (1) when using
non-OX-coded film with film speed scale set at
OX
, (2) when
OX
contacts require cleaning, (3)
at end of Iilm, (4) when shutter
is
re
leasedJ
Accessory shoe
_iii,.
(for electronic flash; see page 26)
L----
Electrical contacts
4