•
;":
Eo.:,
F
S.
( +,
..
~
..
,-
)
3. Adjust shutter speed and aperture until electronic analog display shows desired
exposure.
4. Recompose the picture and shoot.
In
Single Servo AF
mode
, if recomposing the picture could
change sUbject-to-camera distance, refocus by briefly
removing your finger from the shutter release button and
lightly pressing
it
again.
In
Continuous
Servo AF
mode
, if recomposing the picture
will not change sUbject-to-camera distance, push and hold
the AF-L button before recomposing.
91