Nikon PRONEA S - Set Focus Mode Selector to AF

Set
Focus Mode
Selector
to
AF
4
When
the focus
mode
selector
is
set to
AF
(autofocus),
the camera
focuses automatical
ly.
4,1
4,2
Set the
focus mode
selector
to AF
(autofocus).
.
Make sure
to turn the focus mode
selector
until it clicks into
oosition.
.
To focus, lightly
press
the shutter release button.
(See page
27.)
Situations
where autofocus
may not work
as expected:
.
Autofocus
may not work
as
expected in the following situations.
In
such situations,
focus
on a
different subject located at the same distance, use
focus lock,
(page
42)
then recompose.
.
When
you
are unable to
perform
focus lock, set
the focus mode
selector
to M
(manual)
and focus
manually
using
the
clear
matte field.
www.orphancameras.com