-CONTROLS
IN
DETAll-continued--------
-----!
With the
SB·16A
As
soon
as
the flash unit
is
turned
on
, both ready·lights
blink
in
the fqllowing cases:
1)
When the AS-8's mounting foot
is
not securely locked.
2)
When using the TTL mode with the Nikon F3-series
camera and the camera's film speed setting
is
set well
beyond the usable range of ASA/ISO 25"-'400, without
exposure compensation.
3)
When the shooting mode
se
lector
is
set at TTL with
any camera other than the Nikon F3-series.
Note that when the shutter speed setting
on
the Nik
on
FE
or FM2
is
improper for correct flash synchronization and
the camera's meter
is
on
(only in the case of the
FE)
, just
the camfJra's ready-light blinks as a warning, while the
one
on
the flash unit does not blink but simply lights
up
to
indicate when the flash
is
ready to fire.
38
To Next Page
Loading...
