Using
a diffuser
It
is
also possible to diffuse the light
by
placing a trans-
lucent material, such
as
one or more sheets of traci
ng
paper, between the flash and subjec
t.
You
can create
more pronounced diffusion by placing a certain distance
between the diffuser and
fla
sh than
by
wrapping the
diffuser around the flash head. Experimentation with
different fla
sh
-to-diffu
se
r
di
stances and
/o
r
wi
th more
than one diffuser is recommended.
Notes:
1J
In
non-
TTL
automatic shooting, make sure that the diffuser does not
come between the
S8-16's sensor and the subject.
2)
Some
diffusion materials may cause a slight reddish tint
in
color photo-
graphs by decreasing the color temperature
of
the light from the
flash.
3)
When
a diffuser
is
used, shooting distance cannot
be
read with the
exposure calculator dial.
57
To Next Page
Loading...
