Nikon SB-5000 Manual

14
▶
Index
*5 Wireless Remote Controller WR-R10 (firmware ver. 3.00 or later) and WR adapter WR-A10 are required
(both optional).
*6 Settings can only be made for remote flash units in groups A and B, when the SB-500 is used as the master flash unit.
*7 The SB-500 can only be used in groups A and B as a remote flash unit.
About Advanced Wireless Lighting
Using optical control and radio control concurrently
Camera
*5
D5
D500
When using optical control and radio control concurrently,
settings for remote flash units (radio control) in groups D, E and
F can be made on the camera.
SB-910
SB-700
SB-500
*6
Remote flash units in groups A, B and C can be operated from
the optical control master flash unit attached to the camera.
SB-5000
SB-910
SB-700
SB-500
*7
SB-5000
Optical control master flash unit
Remote flash unit
Groups A, B, C (optical control) Groups D, E, F (radio control)

Nikon SB-5000 Specifications

General

Type	-
Product color	Black
Flash coverage	24 - 200 mm
Flash guide number	55 m
Wireless connection	Yes
Approximate recycling time	2.6 s
Brand specific flash systems	i-TTL (Nikon)
Battery type	AA
Number of batteries supported	4

Weight and Dimensions

Depth	137 mm
Width	73 mm
Height	103.5 mm
Weight	420 g