To Next PageTo Next PageWhy won't my Nikon Camera Flash SB-5000 turn on?
Your Nikon Camera Flash might not be turning on because the batteries are not correctly installed. Make sure to insert them properly. Alternatively, the battery power may be weak, in which case you should replace the batteries.
What to do if my Nikon Camera Flash SB-5000 is not firing?
If your Nikon Camera Flash isn't firing, check the custom settings. The flash function may be canceled there. If so, activate the flash function in the custom settings.
What to do if the Nikon Camera Flash SB-5000 does not operate?
The SB-5000 may not operate because the thermal cut-out is active. Wait until the SB-5000 cools down.
What to do if the flash-ready indicator does not light up on my Nikon Camera Flash SB-5000?
If the flash-ready indicator isn't lighting up, the standby function might be activated. Try pressing the camera shutter-release button halfway, setting the SB-5000’s power switch to a position other than OFF, or pressing the SB-5000’s test firing button. Also, check if the battery power is weak and replace the batteries if needed.
What to do if all operations have stopped on my Nikon Camera Flash SB-5000?
If all operations have stopped, replace the batteries.
Why is the zoom head position not set automatically on my Nikon SB-5000 Camera Flash?
The zoom head position might not be set automatically because the built-in wide panel is in use or the Nikon Diffusion Dome is attached. Remove these. Alternatively, the power zoom function may be canceled, so activate it.
What to do if my remote Nikon SB-5000 Camera Flash unit does not fire?
If the remote flash unit isn't firing, the distance between the master flash unit and the remote flash unit might be too long, or there could be an obstacle between them. Try changing the positioning of the units. Also, ensure a link with the remote flash unit has been established by resetting the link if necessary, especially in wireless multiple flash-unit photography using radio control.
Why is the effective flash output distance range not appearing on my Nikon SB-5000 Camera Flash?
The effective flash output distance range may not appear if the flash head is not set to the forward-facing position. Set the flash head to the forward-facing position.
What does it mean if the flash-ready indicator flashes slowly after firing on my Nikon Camera Flash?
If the flash-ready indicator flashes slowly after firing, underexposure may have occurred. Try using a wider aperture or move the flash unit closer to the subject and reshoot.
What does it mean if the remote flash unit emits 8 long beeps on my Nikon Camera Flash?
If the remote flash unit emits 8 long beeps, underexposure may have occurred. Use a wider aperture, move the flash unit closer to the subject or change the position of the flash unit and reshoot. Also, check the channel and link mode setting and try again, because pairing may have failed.
General| Type | - |
|---|---|
| Product color | Black |
| Flash coverage | 24 - 200 mm |
| Flash guide number | 55 m |
| Wireless connection | Yes |
| Approximate recycling time | 2.6 s |
| Brand specific flash systems | i-TTL (Nikon) |
| Battery type | AA |
| Number of batteries supported | 4 |
Weight and Dimensions| Depth | 137 mm |
|---|---|
| Width | 73 mm |
| Height | 103.5 mm |
| Weight | 420 g |
