Nikon SB-5000 Reference Manual

H-1
H
Tips on Speedlight Care and Reference Information
En-01
Tips on Speedlight Care and
Reference Information
This section explains troubleshooting, Speedlight care, specifications and
optional accessories.
Troubleshooting
If a warning indicator appears, or any trouble occurs, use the following
chart to determine the cause of the problem before taking the Speedlight
to a retailer or Nikon-authorized service representative for repair.
Problems with the SB-5000
Problem Cause Solution
0
The power
cannot be
turned on.
The batteries are not
correctly installed.
Insert the batteries correctly. B-16
Battery power is weak. Replace the batteries. B-17
The ash-ready
indicator does
not light up.
The standby function is
activated.
• Press the camera shutter-
release button halfway.
• Set the SB-5000’s power
switch to a position other
than [OFF].
• Press the SB-5000’s test
ring button.
E-28
Battery power is weak. Replace the batteries. B-17
The SB-5000
does not re.
The ash function is
canceled in the custom
settings.
Activate the ash function in
the custom settings.
B-24

Nikon SB-5000 Specifications

General

Type	-
Product color	Black
Flash coverage	24 - 200 mm
Flash guide number	55 m
Wireless connection	Yes
Approximate recycling time	2.6 s
Brand specific flash systems	i-TTL (Nikon)
Battery type	AA
Number of batteries supported	4

Weight and Dimensions

Depth	137 mm
Width	73 mm
Height	103.5 mm
Weight	420 g