129
Using the Menu
The Network Menu
Configure settings when establishing a wireless connection between the camera and
a smart device, or the camera and ML-L7 Remote Control (available separately).
Connecting to a Smart Device
When you connect to a smart device, you can upload images captured with the
camera to the smart device or operate the camera remotely with the smart device.
Install the SnapBridge app on the smart device.
Set Choose connection (A130) in the network menu to Smart device (default
setting) in advance.
• The connection methods are as follows.
- Bluetooth connection: You can automatically upload still images (uploaded at
an image size of 2 megapixels). When establishing a Bluetooth connection for
the first time, use Connect to smart device (A130) in the network menu to
pair the camera and smart device.
You can also switch to a Wi-Fi connection after establishing a Bluetooth
connection.
- Wi-Fi connection: You can download still images (2 megapixels or original size)
and movies to the smart device or perform remote photography.
• For connections or use of the SnapBridge app, see the included “SnapBridge
Connection Guide” and SnapBridge online help.
Connecting to the Remote Control
Set Choose connection (A130) in the network menu to Remote control in
advance.
The camera and remote control are connected through Bluetooth. When connecting
to the remote control for the first time, pair the camera and remote control.
See “ML-L7 Remote Control” (A173) for more information about the remote control.
The Network Menu
Press the d button M select J (network menu) M k button
To Next Page
Loading...
Need help?
General
