Nikon VQA091AA Reference Manual

175
Technical Notes
Accessories
Pairing the Camera and Remote Control
Before using the remote control for the first time, it must be paired with the camera.
• Make sure that the remaining battery level is sufficient.
1 Press the d button on the camera.
2 Press the multi selector J, use HI to select J (network
menu), and press the k button.
3 Select Choose connection, and press
the k button.
4 Select Remote control, and press the
k button.
5 Select Connection to remote, and
press the k button.
• Pairing is enabled and the camera waits for the
connection to be established.
• If you cannot select Connection to remote, set
the following in the network menu.
- Airplane mode: Off
- Bluetooth M Connection M Enable
Airplane mode
Choose connection
Connect to smart device
Connection to remote
Wi-Fi
Send while shooting
Smart device
Choose connection
Remote control
Airplane mode
Choose connection
Connect to smart device
Connection to remote
Wi-Fi
Send while shooting

Nikon VQA091AA Specifications

General

Brand	Nikon
Model	VQA091AA
Category	Digital Camera
Language	English